KOREKOTE EPOXY COATINGS

Better for the environment. Better for business.

SixBuckets_LargeCrop_F

extra strong

40ML

—Coating—

(2 Coats)

Easy one-coat application

Surface Ready

12 hours

At a temp of 70° F

Fully Cured

24-48 hours

At a temp of 70° F

Maximum

Bond
Strength

Self Leveling

Mildew Inhibiting

Ultra LOW VOCs

AND no foul odors

UV Resistance

Coatings Coverage Guide

1 unit (3 gallons) of  parts  A/B mixed covers a max of 300 sq./ft.

Trusted by America’s largest corporations

KreteKote

EPOXY Floor
Coating System

  • Eliminates hot tire peel
  • Extra strong 20ml coating
  • maximum bond strength
  • Ultra Low VOCs or foul odors
  • Self leveling for easier application
  • Low environmental impact
  • Non-permeable surface
  • Fully cured 24-48 hours ( at 70°F)
  • Easier to apply / clean up than paint
  • Mildew inhibiting

KoreKote SafeResin
KoreKote KreteKote Concrete Floor Epoxy coating System

Concrete, Stone, Masonry, Steel, Wood

ARMORKOTE

Pool & Marine Epoxy
Coating System

  • America’s preferred pool surface coating
  • UV stable
  • Outstanding chlorine and chemical barrier
  • Extra strong 20ml coating
  • maximum bond strength
  • Ultra Low VOCs or foul odors
  • Mildew inhibiting
  • Self leveling for easier application
  • Low environmental impact
  • Non-permeable surface
  • Fully cured 24-48 hours ( at 70°F)
  • Easier to apply / clean up than paint

KoreKote SafeResin
KoreKote Amorkote Pool & Marine Epoxy coating System

Marcite, Gunite, Concrete, Fiberglass,
Marble, Acrylic,

SMARTKOTE

Moisture Block
Coating System

  • Green Seal™ Certified moisture
    resistant coating
  • Coat and seal: pools, basements, tanks and decks
  • Outstanding chlorine and chemical barrier
  • UV stable
  • Extra strong 20ml coating
  • Maximum bond strength
  • Ultra Low VOCs and no foul odors
  • Self leveling for easier application
  • Low environmental impact
  • Fully cured 24-48 hours ( at 70°F)
  • Easier to apply / clean up than paint

KoreKote ArmorKote Green — Green Seal Certified

This product meets Green Seal™ Standard GS-11 based on effective performance, minimized/recycled packaging, and protective limits on VOCs and human toxicity. GreenSeal.org.

KoreKote SmartKote

Marcite, Gunite, Concrete, Fiberglass, Concrete, Stone, Masonry, Steel, Wood
Marble, Acrylic

VaultKote

BASEMENT EPOXY
Coating System

  • Reduces radon gas levels up to 50%
  • R4 insulation rating
  • 14,000 psi hydrostatic pressure*
  • Ultra Low VOCs or foul odors
  • Extra strong 20ml coating
  • maximum bond strength
  • Mildew inhibiting
  • Self leveling for easier application
  • Low environmental impact
  • Non-permeable surface
  • Fully cured 24-48 hours ( at 70°F)
  • Easier to apply / clean up than paint

*14,000 PSI HYDROSTATIC PRESSURE—When applied in combination with KoreKote BASEKOTE.

KoreKote SafeResin
KoreKote VaultKote BASEMENT EPOXY Coating System

Concrete, Stone, Masonry, Steel, Wood

ShieldKote

General Purpose Epoxy
Coating System

  • UV stable
  • All-purpose coating and sealer
  • Extra strong 10ml coating
  • maximum bond strength
  • Ultra Low VOCs or foul odors
  • Mildew inhibiting
  • Self leveling for easier application
  • Low environmental impact
  • Non-permeable surface
  • Fully cured 24-48 hours ( at 70°F)
  • Easier to apply / clean up than paint

KoreKote SafeResin
KoreKote ShieldKote General Purpose Epoxy coating System

Concrete, Stone, Masonry, Steel, Stainless Steel, Wood Decking, Plywood, Pressboard, Slatboard

Have a special coating project?

We can customize a solution

PRIMER & FILLERS

Simple surface preparation is critical for maximum bond!

BASEKOTE

Primer Epoxy
coating System

  • Primer layer coat for concrete & steel
  • Strengthens concrete substrate
  • Protects steel substrate from rust
  • Hydrostatic pressure barrier
  • Cures in damp environments
  • maximum bond strength
  • Ultra Low VOCs or foul odors
  • Mildew inhibiting
  • Self leveling for easier application
  • Low environmental impact
  • Fully cured 8 hours ( at 70°F)

KoreKote SafeResin
KoreKote BaseKote Epoxy Primer coating System

Concrete, Stone, Masonry, Steel, Stainless Steel, Wood Decking, Plywood, Pressboard, Slatboard

BONDKOTE

Mastic & Filler Epoxy
coating System

Looking for 100% bonding strength and a material that will cure in almost any environment? With its low/no VOCs you can breathe a little easier as you fill those tough holes and divots. When it comes to a bonding filler, nothing is as effective or environmentally friendly as BondKote.

 

  • All-purpose filler, grout & bond agent
  • Cures in damp environments
  • Maximum bond strength
  • Ultra Low VOCs or foul odors
  • Low environmental impact
  • Fully cured 48 hours (at 70°F)

KoreKote SafeResin
KoreKote BondKote Mastic & Filler Epoxy coating System

Concrete, Stone, Masonry, Steel, Stainless Steel Wood Decking, Plywood, Pressboard, Slatboard Plastic: ABS, PVC, Polycarbonate

Surface Cleaner

Assures longer lasting
& more durable finish.

It’s critical to properly clean your surface. Before applying KoreKote products always make sure your surface is clean, dry and dust free. This assures a stronger bond and a longer lasting more durable finish.

 

  • Dry powder/No fumes
  • Activates only when spread on the wet surfaces
  • No acid fumes that can cause lung damage
  • Does not leave any gel film that can cause delaminating of applied material
  • Etches concrete when allowed to sit on wet surfaces for 20 min
  • Improves epoxy bonding performance
  • Cleans concrete, stone, wood, masonry, metal
  • Does not leave acid residue
  • Will not leave thin blush film

KoreKote Surface Cleaner

SURFACE ADDITIVES

Add a little personality to your epoxy coating

ColorChips

decorative
vinyl color chips

  • Colors to match any décor
  • Non-flammable
  • Optimal flexibility and strength
  • Colorfast, UV stable pigments
  • Hides sub-surface imperfections
  • Easy to apply
  • Sound/noise deadening qualities
  • Sustainable and safe

ColorChips_448x448

AntiSkid

Add texture, finish
and safety

Durable. Safe. Practical. These are just a few of the benefits of adding an anti-skid additive. It’s an amazing way to add texture, finish and safety.

 

  • Added measure of safety
  • Will not soften under normal heat exposure
  • Mixes well with material
  • Chemical and solvent resistant

KoreKote Anti Skid Epoxy Coating Additive

KoreKote

Pro Benefits Program

Interested in making your job easier and more efficient? Sign up for our Pro Program and get access to a dedicated KoreKote Specialist and host of customized services.

Truck2
0